How to Use Melt Glue Gun? Some Tips Teach You to Use Hot Melt Glue Gun

Melt glue gun is a tool which is often used in building, especially in the decoration of the house. It is generally used in coating application materials. Melt glue gun has a precise opening effect, a variety of nozzles, can meet the requirements of different production lines, unique filter design, conducive to cleaning, etc.. General melt glue gun for a long time under high temperature will not be deformed, the joints and other places are durable. So melt glue gun is widely used in food plants, electronics factories, packaging plants and other places.
The melt glue gun also need certain skills, use it familiarly is not only perfect glue, but also hurt yourself because of the principle of the high temperature.

Tip 1: How to glue?
Get the melt glue gun, the first to open the packaging, in the hot melt glue gun packaging is generally have a small bracket, the small bracket on the front of the gun in the two small holes. Then used to support the hot melt glue gun, so that when the hot melt glue gun is used, the table can not be burnt.
The glue stick is inserted into the melt glue gun, and is connected with the power supply, and switch on the melt glue gun. When the melt glue gun LED lights on, indicating that the melt glue gun is heating. Generally only need to wait a few minutes, the melt glue gun will be able to hit the glue.
Tip 2: Learn to prolong the service life of the melt glue gun
In general, the melt glue gun for their own DIY design and decoration are very different, DIY designer will not use melt glue gun for a long time. If you use the melt glue gun to DIY, you have to design works well first, then use the melt glue gun to glue.
The reason is actually very simple. If use the melt glue gun for DIY, the melt glue gun in a state of heat long time, the glue has been heated will slowly flow out. If the glue is too little in melt glue gun, the gun will be empty inside, then melt glue gun can easily be burned. In general, if the melt glue gun is not used for more than ten minutes, it has to turn off the power, avoid to damage the melt glue gun.

Tip 3: Need to pay attention to safety when use melt glue gun
The melt glue gun is used for heating the principle of melt glue, extruded glue and good spreading. The characteristic makes the melt glue gun in the heating part of the temperature is very high, when you in the use of the time must be in advance to do a good job of protection measures, or exposure to the rubber gun high temperature part is easy to be burned. Even if you do a good job in the use of protective measures in the process must be careful to avoid the occurrence of burns accident.
We have to say about the use of melt glue gun. Generally speaking, the melt glue gun is attached to the use of instructions, we must carefully read the instructions and precautions when placing and use.
Source: How to Use Melt Glue Gun? Some Tips Teach You to Use Hot Melt Glue Gun
More details please click Hot News

How to Use Melt Glue Gun? Some Tips Teach You to Use Hot Melt Glue Gun

Melt glue gun is a tool which is often used in building, especially in the decoration of the house. It is generally used in coating application materials. Melt glue gun has a precise opening effect, a variety of nozzles, can meet the requirements of different production lines, unique filter design, conducive to cleaning, etc.. General melt glue gun for a long time under high temperature will not be deformed, the joints and other places are durable. So melt glue gun is widely used in food plants, electronics factories, packaging plants and other places.
The melt glue gun also need certain skills, use it familiarly is not only perfect glue, but also hurt yourself because of the principle of the high temperature.

Tip 1: How to glue?
Get the melt glue gun, the first to open the packaging, in the hot melt glue gun packaging is generally have a small bracket, the small bracket on the front of the gun in the two small holes. Then used to support the hot melt glue gun, so that when the hot melt glue gun is used, the table can not be burnt.
The glue stick is inserted into the melt glue gun, and is connected with the power supply, and switch on the melt glue gun. When the melt glue gun LED lights on, indicating that the melt glue gun is heating. Generally only need to wait a few minutes, the melt glue gun will be able to hit the glue.
Tip 2: Learn to prolong the service life of the melt glue gun
In general, the melt glue gun for their own DIY design and decoration are very different, DIY designer will not use melt glue gun for a long time. If you use the melt glue gun to DIY, you have to design works well first, then use the melt glue gun to glue.
The reason is actually very simple. If use the melt glue gun for DIY, the melt glue gun in a state of heat long time, the glue has been heated will slowly flow out. If the glue is too little in melt glue gun, the gun will be empty inside, then melt glue gun can easily be burned. In general, if the melt glue gun is not used for more than ten minutes, it has to turn off the power, avoid to damage the melt glue gun.

Tip 3: Need to pay attention to safety when use melt glue gun
The melt glue gun is used for heating the principle of melt glue, extruded glue and good spreading. The characteristic makes the melt glue gun in the heating part of the temperature is very high, when you in the use of the time must be in advance to do a good job of protection measures, or exposure to the rubber gun high temperature part is easy to be burned. Even if you do a good job in the use of protective measures in the process must be careful to avoid the occurrence of burns accident.
We have to say about the use of melt glue gun. Generally speaking, the melt glue gun is attached to the use of instructions, we must carefully read the instructions and precautions when placing and use.
Source: How to Use Melt Glue Gun? Some Tips Teach You to Use Hot Melt Glue Gun
More details please click Hot News

Eastmachinery Free Sample Giveaway Phase III Is Heavy Attack

Eastmachinery Free Sample Giveaway Phase II is over, and is being reviewed to determine the winner of the final stage of the sample. Now Eastmachinery Free Sample Giveaway Phase III have been started for this period. The sample products includes chain saw, grass trimmer, cordless hedge trimmer, 3d printing pen, electric grinder, jewelry washing ultrasonic cleaner, led glass tube light, auto oil filter, cordless electric brush.
Welcome interested customers to apply, everyone has the opportunity, if you carefully, the opportunity will be even greater. And if you apply for the sample, you will have the opportunity to get the sample; if you do not apply for the sample, then you have the opportunity to get the sample is zero. So, if you need it, come and join us.
We will sincerely welcome you to join the activity. For each application, we have the greatest sincerity.

Source: Eastmachinery Free Sample Giveaway Phase III Is Heavy Attack
More details please click Hot News

What to Pay Attention to When Using Electric Sheep Shearing

Electric sheep shearing two: sheep clippers and shearing machine, sheep fader applicable to 500 only small-scale farming, the family sheep farmers, shearing machine is used in large and medium sized livestock or professional shearing. Use electric sheep shearing can greatly improve cutting speed and effect of wool, have cut too fast, stubble low, neat sheep characteristics, according to the years of promotion electric sheep shearing of experience and customer feedback, following with particular attention to:

1, Proper lubrication. Electric sheep scissors can not dry cut. Some farmers bought electric wool, use immediately after opening, then cut 3 to 4 sheep do not move. The use of this method of error more than low efficiency, and great damage to the clippers. Experts recommend: clipper blade tip to frequently in the soapy water dip wet, on the one hand can be lubricated blades, you can also soften the sheep oil and sweat. Before use, the use of lubricating oil in the oil hole, suggested that farmers to purchase large packages of lubricating oil.
2, Quick push shear. Electric sheep scissors is rubbing motion, as long as the boot. The blade is beginning to wear out, continuous and fast and agile push shear in blade life cut more wool. Novice farmers to deliberately push the frequency of exercise, push and shear action can be seen in the video and the following text description.

3, Read the instruction manual. Imagine using the manual before using the electric sheep scissors. Some customers after the replacement of the blade did not tighten the pressure adjustment knob, the boot blade immediately pop up, pressure regulating knob slide wire damage. This is very dangerous, and this damage is not within the scope of the warranty.
4, Blade grinding. The appearance of the electric hair scissors do not move, it is likely to be blunt blade, need to be polished in a timely manner.

Source: What to Pay Attention to When Using Electric Sheep Shearing
More details can click Hot News

Polyes Q1 3d Printing Pen: Which Pen that Possible to Write in the Air

The 3d printing pen is a pen which possible to write in the air, help you to liberate the imagination from the paper. If you feel that the two-dimensional picture is not vivid enough, want to make it into a three-dimensional object, it can help you to do. Polyes Q1 is the world's first cool resin light-curing 3D printing pen with a number of patented technology, it is safe, green, environmental-friendly, and suitable for all ages. With this technique, we can draw three-dimensional physical graphics or structure rapidly. The pen has a bright market prospect, according to authoritative data, the expected market capacity of 3D creative pen is to be 10 billion composite market, it shows that a new age of blue ocean opportunity is coming!

Features of Polyes Q1 3D printing pen as follow:
1. Cool: Instead of using FDM technology, Polyes Q1 uses cool ink,thus avoiding dealing with high temperatures and unpleasant odors.

2. Colorful: Various colors, and free comnbination of both parts of the pen.

3. Mode Switch: Flexibility and easeof use in switching between the different modes.

4. Blue-Led: Utilizing blue LED which minimizes risk of injury to eyes, kids included.

5. Innovative: Hone children's imagination and develop their creativity.

6. Portable: Portability and USB charge ensures convenience without the hassle and potential danger of cords.

7. Child-Safety Switch: The level sensor and child-safety swith prevent the eyes being hurt by the LED light; If you keep the switch on, the LED light will go out automatically once the pen is above ground level.

8. Template Different design patterns included for practicing.

Source: Polyes Q1 3d Printing Pen: Which Possible to Write in the Air - EastMachinery

More details can click Hot News

How Can You Miss the Power8 Workshop Tool Set! If You Are An Amateur Woodworker

The power8 workshop's Multi-Award Winning Design is centred around an armoured, innovative case and unique and Patented POWERhandle system. The POWERhandle design incorporates lithium-ion batteries, variable trigger and handle into one unit allowing the tools to pack into The Worlds Smallest 4 Piece Combo Kit. Combined with the armoured case this tool kit becomes a full 8 function workshop!

Cel WS3E Power8 Workshop
CA01 Armoured Case with Stainless Steel Work Surface, which contains;
- 1x PH11 18v 2.6Ah Li-Ion POWERhandle
- CS01 140mm Circular Saw
- JS02 Jigsaw with Quick Release multi-blade chuck
- HD01 HAMMER Drill/Driver
- HL02 3W LED Torch Head
- PF02 Stainless Steel Post/Fence With Drill Press return spring
- CB01 Lift Out Canvas Bag
- CD03 Fast Charger Dock which quickly charges Li-Ion, NiMh and NICD POWERhandles. Includes SCP (Secondary Charger Point)
- PT01 Metal Protractor
- WC01 Work Clamp

It all packs away inside the case, this tool box really is a full workshop in one armoured case. Please see the individual item descriptions for further information.Compatible with the PHAC POWERhandle AC Mains transformer and PHEX POWERhandle Extender, giving the choice of AC or DC power!

The Power8 Workshop Includes All The Things Below:
- HD01 13mm Hammer Drill/Driver x 1
- CS01 140mm Circular Saw Head x 1
- JS02 Jigsaw Head x 1
- HL02 LED Light Head x 1
- PH11 2.6Ah Li-ion POWERhandle x 1
- CA03 Built-in 1hr Fast Charger x 1 (Charging dock with LCD indicator)
- PF01 Spirit Level/Post/Fence x 1
- PL01 Press Lever/Push Stick x 1
- PT01 Protractor x 1
- WC01 Work Clamp x 1
- AP01 Drill bit set in accessory case x 1
- AP02 Jigsaw blade set in accessory case x 1
- Owner's Manual, Gift Box are included x 1
Source: How Can You Miss the Power8 Workshop Tool Set! If You Are An Amateur Woodworker
More details please click Hot News

Eastmachinery Free Sample Giveaway Phase Ⅱ Is Grandly Promotes

The first phase of the free sample giveaway activity has been successfully concluded, and the samples are also in distribution. Now is the opening of the second phase of the sample activities.

Share & Win A Gift!
Free Sample 【Phase II】is coming! Get your free sample at Eastmachinery!
And share it with your friends on Facebook, you can win free gifts.
20 Likes: Car Radar Detector
50 Likes: Cordless Electric Brush
100 Likes: Gasoline Chainsaw
Limited stock, hurry up, until stock lasts.
To participate:
1. Like the Eastmachinery Facebook Page;
2. Share the post with your friends on Facebook;
3. Encourage your friends to do the same, and “like” your post;
Source: Eastmachinery Free Sample Giveaway Phase Ⅱ Is Grandly Promotes
More details can click Hot News

What Need to Pay Attention When Using a Electric Wrench?

Electric wrench is a tool to tighten the bolts which to the power supply or battery powered wrench. Electric wrench is mainly used in steel industry installation, and used to install steel structure high strength bolts. The high strength bolts are used to connect steel contacts, usually occurs by way of a bolt group.

Introduce the attentions in use of electric wrench:
1, Pull electric wrench force should be uniform and soft, absolutely do not use short, impulsive force to turn. Because the tug will produce an impulse, at the stop force moment, the screw or bolt may have been twisted too far.

2, Contaminants can interfere with accurate torque values. If parts or screw has the pollutant, then we will not get the correct torque value.
3, Friction is a common phenomenon, but there are two aspects of the role of good or bad. The good news is keeping parts together; the bad news is that in the tightening, it may lead to erroneous results. A mechanic hand tight connection with only 10% - 20% for tension, and in many cases, 40% - 50% of the torque is used to overcome the friction between the bolt head and the parts of, along the screw bolt and a screw hole of the spouse thread surface also produce additional friction. So when tightening the bolts, all these friction factors and other factors should be taken into account.

4, Tighten the screw thread on the injury or obstacle of the nut or bolt, to pay attention to the need for additional torque through the damaged parts of the site to be added to the recommended torque value.

Source: What Need to Pay Attention When Using Electric Wrench?
Details can be found http://www.eastmachinery.com/guide